10 Things That Can Make CNG Vehicles’ Cylinders Explode And Preventions

E

Enioluwa Adeniyi

Guest
Tinubu Govt Presents CNG Buses To Labour, Students (Photos)

Compressed Natural Gas (CNG) vehicles use high-pressure cylinders to store natural gas as fuel. While these vehicles are generally considered safe and environmentally friendly, several factors can lead to cylinder failures or explosions.​


While CNG vehicles are generally safe and beneficial for the environment, it is vital to understand and address the potential risks associated with their high-pressure systems.

By implementing regular inspections, adhering to safety protocols, and ensuring quality materials and proper installations, the risks of CNG cylinder explosions can be significantly minimized, enhancing the overall safety of CNG vehicles.

Some Nigerians, especially commercial vehicle owners, have started converting their vehicles from petrol-powered to CNG-powered to avoid the high cost of petrol.

Here are ten potential causes that could result in CNG cylinder explosions:

1. Over-Pressurization

– Description: CNG cylinders are designed to withstand high pressures, typically up to 3,600 psi (pounds per square inch). However, if the pressure inside the cylinder exceeds its maximum rating due to factors such as temperature increases or malfunctioning regulators, it can lead to catastrophic failure.

– Prevention: Regular inspection and maintenance of pressure regulators and safety valves can help prevent over-pressurization.

2. Poor Quality Materials

– Description: CNG cylinders must be made from high-strength materials to ensure they can withstand the pressure. Using substandard or counterfeit materials in manufacturing can lead to weaknesses and eventual failure.

– Prevention: Always ensure that CNG cylinders are sourced from reputable manufacturers who comply with industry standards and regulations.

3. Improper Installation

– Description: If a CNG cylinder is not installed correctly in the vehicle, it may be subjected to stress or vibration that could weaken it over time, leading to cracks or leaks.

– Prevention: Professional installation by trained technicians is essential, along with regular inspections to ensure proper mounting and support.

4. Physical Damage

– Description: Dents, scratches, or other forms of physical damage can compromise the integrity of a CNG cylinder. Even minor damage can lead to stress concentrations that may result in failure under pressure.

– Prevention: Regular visual inspections of the cylinders for any signs of damage, especially after accidents or impacts, are crucial for safety.

5. Corrosion

– Description: While CNG cylinders are typically resistant to corrosion, prolonged exposure to harsh environmental conditions or inadequate maintenance can lead to rust or corrosion, weakening the cylinder.

– Prevention: Implementing regular cleaning and inspection schedules can help identify and mitigate corrosion risks.

6. Thermal Expansion

– Description: CNG expands when heated. If a cylinder is exposed to extreme temperatures, the gas inside can expand and increase the pressure beyond safe levels, leading to a risk of explosion.

– Prevention: CNG vehicles should not be parked in direct sunlight or exposed to high temperatures for extended periods. Proper ventilation is also essential in storage areas.

7. Leakage

– Description: If there are leaks in the cylinder or the fuel system, this can lead to a build-up of natural gas in enclosed spaces. If an ignition source is present, this can result in a fire or explosion.

– Prevention: Regular checks for leaks using appropriate detection equipment can help identify problems before they escalate.

8. Inadequate Maintenance

– Description: Failure to follow maintenance schedules can lead to unnoticed wear and tear on the cylinder and associated systems, increasing the risk of failure.

– Prevention: Adhering to manufacturer-recommended maintenance schedules, including periodic inspections and tests of the CNG system, is essential for safety.

9. Incorrect Filling Procedures

– Description: Improper filling techniques, such as overfilling or using incompatible equipment, can damage the cylinder and increase the risk of explosion.

-Prevention: Only trained personnel should handle CNG filling operations, and appropriate protocols must be followed during the refueling process.

10. Systemic Failures

– Description: Failures in the safety systems designed to monitor and control pressure and temperature can lead to dangerous conditions. If the safety mechanisms fail, the likelihood of an explosion increases.

– Prevention: Regular testing and maintenance of safety systems, including pressure relief valves and gauges, are crucial to ensure they function correctly.

The post 10 Things That Can Make CNG Vehicles’ Cylinders Explode And Preventions appeared first on Naija News.
 
Back
Top